Vazquez Commodities Corporation
1269 North EDSA near Kaingin Road
Balintawak, Quezon City
363-4545, 413-0626, 366-4505, 366-4506
info@vazcomm.com
1269 North EDSA near Kaingin Road
Balintawak, Quezon City
363-4545, 413-0626, 366-4505, 366-4506
info@vazcomm.com
- The character of PME-202 acrylic acid water-resistant paint film:
- Strong cementing power to concrete.
- Excellent Flexibility: the paint won't chap even if the concrete does.
- By the superior permeability, it does not cause the bubbling when the water is vaporizing in the concrete and mortar.
- For the building near the sea, it is alkali-resistant, which could resist the cauterization.
- It is a compression-resistant material under the moist climate.
- The use of PME-202 acrylic acid:
- Bath room, kitchen, toilet, parterre and places with water existed.
- Roof, balcony, swimming pools, water tank and so on.
- It can be used between the spaces as ALC, plasterboard, plaster brick, mineral fiber brick and calcium silicate broad and so on.
- It could be used as water-resistant materials for the backfill after underground excavation.
- For the link and water-resistant project of expanded cement, ceramics tiles and heat-resistant between the brick and concrete materials.
- The building near the sea, which need salt-resistant and antisepsis materials. The coating project for the bridge and tank.
- For the prevention and cure project of concrete and mortar efflorescence.
- The feature for construction:
- Because the PME-202 acrylic acid isn't harmful to the environment, and it isn't volatile. The process of construction won't be affected by the environment.
- One-fluid mode: it is easy for construction.
- It is easy to change the denseness and use it on the ceiling and upright walling.
- PME-202 acrylic acid contains a high solid component, it's thickness could reach 0.5 - 06 mm for each paint film. It could really save your time.
- The concrete and mortar, expanded cement, watery coating, laminated tile can stick on the paint film (202). It is easier than the so called water-resistant bond in the market and therefore save more money.
| Color | Color changed slightly |
| Test for | -40 degree celius 8hrs -20 degree celius 16hrs 20 degree celius 16hrs 120 degree celius 8hrs For 10 rounds, it is still normal |
| Stick force | 18kg/cm² (JIS.K6848) |
| Pulling-resistant force | 29kg/ cm² (JIS.K6301) |
| Tensibility ratio | Above 450% (JIS.K6301) |
| Intensity of divulsion | 18kg/ cm² (JIS.K6301) |
| Permeability test | 13.7mg/ cm² 24 hrs (JIS.Z0208) |
| Pressure impermeability | (+) Positive pressure 5kg/ cm² 24 hrs. No dank. (-) negative pressure 3kg/ cm² 24 hrs. No dank. |
| Appearance | Cream-colored ropy liquid |
| Main content | Multi-co polymerized resin |
| Solid cement | PME-202 (73%) |
| Viscosity(C.P.S) | 25.000 |
| PH | 5-6 |
| Proportion | 1.2 |
| Electric charge | No |
| M.F.T | 0 deg celius |
| Impregnant | No |
| Durability | Excellent |
| Daubing colume | 1.2-2.0 g/m (Depends on the purpose) |
 |
 |
||||
